Mica Heaters

MICA STRIP HEATERS
MICA STRIP HEATERS
Thin and Light
Fast Response to Temperature & Process Control
Low Cost

FOR HOT PLATES, SEALING EQUIPMENT,
HOT STAMPING, DIES AND MOLDS, ETC.

OPTIONS
A Flexible armor (BX) installed over flexible leads.
B Metal braid installed over flexible leads.
C Flexible leads - PTFE and fiberglass insulated nickel or nickel clad conductor
D Strain relief bracket
E Terminal Box
F Flexible Armor in Right Angle Bracket
G Thermocouple or Clearance Holes
H Button Terminals
I Appliance Pins
J Twist lock plug installed on leads
K Additional thickness, specify standard thickness is 3/16"
L Series with leads-specify option A, B or C
M Dual voltage, specify
N Stainless steel sheath, designed for higher sheath temperatures
O Grounding stud
P Series with post terminals
R Mounting slots 1/4" x 3/8", one at each end of strip
S Mounting slots 1/4" x 3/8" specify location
T No mounting slots

"L" series (flexible leads)

1. Top quality MICA insulation

2. Nickel-chrome ribbon engineered for longest life at rated watts & volts

3. Post terminals - riveted for positive electical connection to element

4. 1/4 x 3/8 mounting hole

5. Standard steel sheath with special surface treatment to increase heat transfer and to retard oxidation (stainless steel option.)
Mica Strips With Post Terminals Mica Strips With Leads

P1R Post terminals at each end of the heater with mounting slots. Available in 3/4" widths or wider.
P2R Post terminals at same end of heater with mounting slots. Tandem along the length. Available in 1" widths or wider.
L1CR Flexible fiberglass leads exiting heater from same end with mounting slots. Available in 1" widths or wider Option"C" shown - leadwire
L2CR Flexible fiberglass lead exiting heater from each end with mounting slots. Available in 3/4" widths or wider Option "c" shown - leadwire.

P3R Post terminals at same end of heater with mounting slots. At right angel to length. Available in 2" widths or wider.
P4R Post terminals at same and f heater with mounting slots. Terminals set off center along the length. Available in 1-1/2" widths or wider.
L3BR Metal braided flexible leads exiting heater from outside top surface with mounting slots. Available in 1" widths or wider. Option "B" shown - braid
L3AR Flexible armor installed over fiberglass leadwire exiting heater from outside top surface with mounting slots. Available in 1" widths or wider Option "A" shown - armor.
SPECIFICATIONS
Length
Minimum without mounting holes 2-1/2"
Minimum with mounting holes 3-1/2"
Maximum consult Omega
Width
Minimum, Types P1R-L2CR 3/4"
Minimum, Type P3R 1-3/4"
Maximum consult Omega
Thickness
Nominal 3/16
 Sheath Temperature
Maximum, Standard units 900 Deg. 482 Deg C
Maximum, Stainless Steel Sheath 1200 Deg. F 650 Deg. C
Wattage
35 WATTS/sq. in. recommended max.
Terminals
10-24 x 7/16 POST TERM. Or 12" FLEX. LEADS
Voltage
Maximum 480VAC